First of all, you need to drop the system into OK Prompt. For Old model which has Sun keyboard, you can press STOP+A, or for newer model / terminal, press break key sequences, example:
————-
~.
#.
#~
~#
If your console is a terminal, you can type :
“shift-break” or
“ctrl-break” or
“ctrl-\” (ctrl-backslash) or
“<enter>” followed by “~” and
“ctrl-break” on Solaris Sparc,
To send a <BREAK> from Hyperterm, use <Ctrl>-<Pause> or <Alt>-<Pause>
On Hyperterminal, Ctrl-Break
————
Okay after you able to drop system to the OK prompt, you will see below PROMPT messages:
Type ‘go’ to resume
ok
—
All you need to do is to type ‘sync’ (without the quotes) and press Enter. The system will immediately panic.
Now the hang condition has been converted into a panic, so an image of memory can be collected for later analysis.
The system will attempt to reboot after the dump is complete.
————-
~.
#.
#~
~#
If your console is a terminal, you can type :
“shift-break” or
“ctrl-break” or
“ctrl-\” (ctrl-backslash) or
“<enter>” followed by “~” and
“ctrl-break” on Solaris Sparc,
To send a <BREAK> from Hyperterm, use <Ctrl>-<Pause> or <Alt>-<Pause>
On Hyperterminal, Ctrl-Break
————
Okay after you able to drop system to the OK prompt, you will see below PROMPT messages:
Type ‘go’ to resume
ok
—
All you need to do is to type ‘sync’ (without the quotes) and press Enter. The system will immediately panic.
Now the hang condition has been converted into a panic, so an image of memory can be collected for later analysis.
The system will attempt to reboot after the dump is complete.
No comments:
Post a Comment