SOALRIS 11 ZONES ( CPU ASSIGN THROUG POOLS)

ASSigning pool to zones
zonecfg:testzone> remove dedicated-cpu
zonecfg:testzone> set pool=pool_batch
zonecfg:testzone> info
zonename: testzone
zonepath: /TESTZONE
brand: solaris
autoboot: true
bootargs:
file-mac-profile:
pool: pool_batch
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
net:
        address not specified
        allowed-address not specified
        configure-allowed-address: true
        physical: net3
        defrouter not specified
capped-memory:
        physical: 4G
        [swap: 1G]
        [locked: 100M]
rctl:
        name: zone.max-swap
        value: (priv=privileged,limit=1073741824,action=deny)
rctl:
        name: zone.max-locked-memory
        value: (priv=privileged,limit=104857600,action=deny)

root@solaris2:/usr/lib/pool# zoneadm -z testzone boot
root@solaris2:/usr/lib/pool# zoneadm list -cv
  ID NAME             STATUS     PATH                           BRAND    IP
   0 global           running    /                              solaris  shared
  10 testzone         running    /TESTZONE                      solaris  excl

root@solaris2:/etc/zones# zlogin testzone
[Connected to zone 'testzone' pts/3]
Oracle Corporation      SunOS 5.11      11.1    May 2013
root@testzone:~# psrinfo
0       on-line   since 12/27/2013 23:12:07
1       on-line   since 12/27/2013 23:12:09
2       on-line   since 12/27/2013 23:12:09
3       on-line   since 12/27/2013 23:12:09
4       on-line   since 12/27/2013 23:12:09
5       on-line   since 12/27/2013 23:12:09
6       on-line   since 12/27/2013 23:12:09
7       on-line   since 12/27/2013 23:12:09
8       on-line   since 12/27/2013 23:12:09
9       on-line   since 12/27/2013 23:12:09


how to add virtual load on cpu
#perl -e 'while (--$ARGV[0] and fork) {}; while () {}' 10
#zonestat 5
#sar ===>cmd not work inside zone
root@testzone:~# sar
-bash: sar: command not found

Comments

Post a Comment

Popular posts from this blog

Understanding How ZFS Calculates Used Space

This document explains how ZFS calculates the amount of used space within a zpool and provides examples of how various ZFS features affect that calculation. DETAILS A ZFS storage pool is a logical collection of devices that provide space for datasets such as filesystems, snapshots and volumes. A zfs pool can be used as a filesystem, i.e. such as mounting/unmounting; to take snapshots that provides read-only (clones are writable copies of snapshots) copies of the filesystem taken in the past; to create volumes that can be accessed as a raw and a block device and for setting properties on datasets. Interaction of all these datasets and associated properties such as quotas, reservations, compression and deduplication (Solaris 11 only) play a role in how ZFS calculates space usage. Neither the du nor df command have been updated to account for ZFS file system space usage. When calculating zfs space usage, always use the following command. # zfs list -r -o space <pool_name...
Read more

Restart autosys agent

#/etc/init.d/uajm_agent stop CA-UAJM Agent stopped. #/etc/init.d/uajm_agent start CA-UAJM Agent started. Follow the below workaround if the autosys agent does not start. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1.Run the command to check the status of both process, auto_remote and csampmuxf # ps -ef|grep 'auto'     root 14712     1  0   Aug 27 ?        2:42 auto_remote     root 27652     1  0 13:00:22 ?        0:00 auto_remote     root 27782     1  0 13:00:40 ?        0:00 auto_remote     root 29066 24480  0 13:01:07 pts/7    0:00 grep auto 2.There should be two entries for /opt/CA/SharedComponents/Csam/SockAdapter/bin/csampmux status . If you see one entry then stop agent and check the autore...
Read more

How To Verify Remote System Controller (RSC) is Configured and Current on Sun Fire[TM] 280R/V480/V490/V880/V890 servers

Steps to Follow: How To Verify Remote System Controller(RSC) is Configured and Current 1.Check to see if the RSC software is already installed. # /usr/bin/pkginfo | grep SUNWrsc 2.If the software is installed the command should output the package name and info.   The version of the package installed in Solaris should match the version of firmware installed on the card.   `rscadm version` in Solaris will display the firmware version. 3.If the software is not installed the packages can be found on the supplemental CD that came with the Solaris Operating Environment. If you do not have the CD the software can be downloaded from MOS: RSC 2.2.2 is supported with Solaris 10, but you need to get this from a supplemental CD (for Solaris 9, since there is no supplemental CD for S10). The packages for Solaris 8 and 9 (and later) are both in the zip file. There are two options of the zip file, 32bit, and 64bit, but they both have the same checksums, so there are...
Read more